Установка Sony Ericsson PC Suite на Windows 7
При попытке установить в Windows 7 PC Suite (v 2.46) от SE на каком-то этапе установки вылетает ошибка “database could not load table launchCondition…” и происходит откат установки Sony Ericsson PC Suite.
Забегая вперед, хочу порекомендовать использование утилиты MyPhoneExplorer от fjsoft.at , которую, кстати, рекомендует и официальный производитель (? если у кого найдется пруфлинк, буду благодарен). С ней не возникает никаких проблем при установке, а все функции PC Suite она выполняет не хуже.
Вариант “Устранение неполадок совместимости” (правой кнопкой мыши на файле, выбираем соответствующий пункт меню, ждем пока система ищет проблемы совместимости и предлагает рекомендуемый вариант - запуск в режиме совместимости с Windows XP) проблему установки PC Suite на Windows 7 не решает - всё та же ошибка.
Однако, если выбрать английский язык в режиме совместимости с Windows XP SP2, то установка проходит “на ура”.
При наличии архиватора WinRar (или 7zip), щелкая правой кнопкой мыши на значке установочного файла PC Suite, должен быть пункт “распаковать” (лучше в отдельную папку). После распаковки файлов (да.. инсталляшка - “обычный” архив-Exe-шник). Если получилось распаковать информацию из файла, можно попробовать проделать следующее:
You can extract the stuff from the Suite Installer from the Sony website but extracting is a LITTLE tricky.
As i am short in time, a short explanation must suffice.
You need: Sony Ericsson Suite from the Sony Ericsson website, orca (its a Microsoft app that comes with Visual studio i think, though there might be other sources or other apps that do the same), Universal Extractor (http://legroom.net/software/uniextract) and finally you need 7zip (www.7-zip.org).procedure:
0. read this little help, read it again, maybe again, try it, read the doc again, try again, if it still does not work you may ask questions!1. use 7zip to extract the original Installer downloaded from Sony
you should get PCSuite.exe and PCSuitex64.exe2. start Universal Extractor WITH ADMIN RIGHTS to extract PCSuite.exe and PCSuitex64.exe in different directorys. there are different methodes that Universal Extractor can use to extract files. in some cases the first option worked for me, in some cases the second, can remember where to use which, just try, you should get some directorys with files in it.
when extracting pcsuite.exe Universal Extractor will try to launch a setup and fail with some massege that you are using the wrong os, just ignore this, we will fix that soon.
in the directory u extracted pcsuite.exe to should folder with random name and in that folder should be a *.msi file.
same goes for the folder where pcsuitex64.exe was extracted to, subfolder with *.msi in it.3. Startup orca and open the *.msi from pcsuite.exe. find “Launchcondition” on the left side, delete the last entry on the right side, safe.
4. start Universal Extractor WITH ADMIN RIGHTS and extract both *.msi, the one we just edited and the one from pcsuitex64.exe
you should get a lot of folders and files5. navigate to where u extracted the pcsuitex64 *.msi to. go deeper down the folder structure to “program files\Sony Ericsson\Mobile4\Drivers2″
here are your x64 symbian drivers, set setup.exe compatibility to Vista, install6. navigate to where u extracted the pcsuite *.msi to. go to the subfolder “program files\Sony Ericsson\Mobile4\InstSupport”
here u find scruntimesetupxx.exe and mrouter3installer.exe
install both, when installing mrouter you might want to configure it to start with every windows startup.7. install myphoneexplorer(http://www.fjsoft.at/)
8. if you are using non x64 os you can probably skip everything with the pcsuitex64.exe as you do not need the drivers.
your drivers are in drivers2 subdir from your pcsuite *.msi9. have phun, be nice, read this help again, GIVE ME MONEY, thx!
For those who couldn’t properly install mrouter (the installer just quits at the startup without any errors), you have to use the universal extractor to extract the mrouter3installer.exe. Then, navigate to the mRouter3InstallerDisk1 subdirectory and delete the “setup.ini” file. Now you can install mrouter properly.
Note that this problem might be x64 specific.
Огромное вам спасибо!
Спасибо за инфу. Благодарю, помогло!
3circumcised…
…